Now Available NEW BFS Ultimate AA Tripod


Now Available is a custom BFS Ultimate AA Tripod.

Some of the features this tripod has to offer:
• New AA Tripod Head built from the ground up. Features the same Pintle dimensions as the German MG-3 AA Tripod. This will allow the shooter to use any adapter that was built for the MG-3 tripod to be able to be used on this tripod as well. (Same Dimensions and ALL BFS Adapters will fit right on) Pintle I.D. is 2' inches at the Yoke.
• The Tripod Head has a built in Treversing locking mechanism. This will allow the shooter to lock down there treversing to hold there fire on a target. (You can see the small black handle in the pics)
• Upper Leg receiver mounting locations are welded to the best angle for your spread. This gives your tripod the best foot print to dig into the earth while shooting. It also keeps your tripod from being top heavy which can create an unstable situation. Once this tripod digs itself into the ground (while shooting) its not going to move.
• Lowers Legs are adjustable for "Height" only. Maximum Height to the top of the pintle is 55' inches. Lowest height achieved with the legs all the way up is a low 3ft which is perfect for sitting in a chair behind.
• Custom MG-3 stlye Pintle shaft is included (comes standard 2' I.D.) Other sizes can be requested at no charged (swapped out at the time of purchase) like 2 3/8' and so on.
• Mig & Tig welded throughout
• Uses D.O.M. and heavy wall tubing throughout. Bottom sliding legs use heavy wall DOM Tubing for maximum strenght from dings and dents.
• Features a (5) Piece design which only take a few minutes to setup when at the range. Also is very compact for storage (Legs come off very easily and can breakdown to a compact package for travel in smaller cars etc)
• Comes in Black or OD Green paint scheme
• Overall this tripod is the Best and Most stable platform to shoot from if you like both standing and sitting using one tripod.
• No more flimsy unstable tripods so treat yourself the Best and get the Ulimate AA! Price for complete Tripod.

Price $475.00 plus $50.00 to ship
For more Info and Pic's Click Here

Now Available NEW! 1919 AA Twin Mount


Now Available is a custom 1919 Twin AA Adapter.

Heres a few features this mount has to offer.
• Twin Can design - 1/2 holds your ammo and the other 1/2 collects your spent links
• Has built in oversized link chutes (Cloth belt friendly)
• Has built in brass collecting capability (Uses a 3.00 inch flexible high temp silicone hose for collecting all of your spent brass. Comes with (2) 5 gallon plastic buckets.
• Adapter comes with (2) built in pintle assemblies & (2) built in T&E mechanisms. This allows you to adjust each gun for different fields of fire.
• Comes with (2) Custom shortened USGI .30 cal ammo cans
• Comes with custom padded shoulder supports (fully adjustable for different should widths)
• Adapter comes with adjustable spring tension design (Makes adjusting the spring tension a breeze for different weight guns)
• Comes with all hardware and is a simple pin on installattion (no modifications necessary to your AA Tripod) • Anti Aircraft Site included.
• Comes in Black or OD Green paint scheme
• Adapter accepts all 1919 & Watercooled variants
• This adapter does (3) things... holds your ammo, collects your spent links and collects your brass all in a very compact lightwieght design. Price for complete adapter system ready to install onto your AA tripod

Price $950.00 plus $70.00 to ship (Arrives in two large boxes)

For more Info and Pic's Click Here

Now Available NEW MG-3 Ground Tripod 1919 Adapters


These newly made custom 1919 Adapters fit the German MG-3 Ground tripod. Heres a few things this Adapter has to offer:

Features
•Comes with the proven Twin-can compact system (Holds your ammo & collects your spent links)
•Adapter clips right onto your Tripod without any modifications
•Comes with custom Belt Feed chute (Accepts all calibers)
•Comes with custom quick locking pins for your .30cal ammo cans (makes changing out your can fast and easy)
•Comes with custom remote trigger extension (This allows you to use the built-in MG42 tripod trigger system) Works perfect and is great for F/A's. You can also shoot it w/or without this extension.
•Has built-in fully enclosed link chute (also cloth belt friendly)
•Comes with all hardware and is a direct bolt-on installation with no modifications necessary to your tripod.
•Adapter uses the built-in recoil system of your tripod (makes shooting your 1919 much smoother)
•Comes in Black or OD Green Scheme This Adapter comes complete ready to bolt onto your MG-3 Tripod, less ammo cans and tripod of course.
Price $350.00 plus $30.00 to ship
For more Info and Pic's Click Here

Video of Product in Use

Now Available NEW BFS Pintle Adapter II


These Pintle Adapters are a great way to upgrade your existing AA Tripod to fit the Browning 1919. It uses a new pintle yoke that has a 2 3/8' inside dimension (same as your 1919). These are very easy to use and come with all supplied hardware.

Price for Pintle complete with supplied hardware.
Price $50.00 shipped

For more Info and Pic's Click Here

M2 Tripod Adapter M2A4
Introducing the new M2A4 Tripod Adapter.These New M2 Tripod Adapters are definitley a step up from my regular M2 Tripod Adapters. One of the key things that this mount has over the other M2 Adapter is that the whole adapter moves up and down with your 1919.The other M2 mount stayed stationary while your 1919 moved up and down. As you can see by this New mount it has a built in chassis where it drops right into your USGI pintle.It continues down towards the T&E location where it has mounting receivers for your 1919 & T&E mechanism.The brass drops right through the adapter and the entire mount raises your 1919 up another 3 inches. The M2A4 Tripod Adapter works with or without my T&E mechanism and comes in the standard OD Green. All hardware is supplied and is a drop in system. This is the ultimate shooting platform is you like using the M2 Tripod!

"The utility and overall versatility of this dual-can tripod adaptor seems truly outstanding, and would be a great investment for any 1919a4 owner."... ~Slick www.drinkfromthefirehose.com

Just released the NEW M8 Tripod Adapter!
This newly designed raised M2 Tripod Adapter was designed for the need to have a taller shooting platform that is based off of the M2 Tripod.The M8 Adapter is a more compact yet highly effective design that raises your 1919a4 another 8' inches from the top of your tripod.This will allow the shooter to sit comfortably behind his or hers 1919 and you will no longer need to lay on the ground to shoot. The M8 Adapter comes just as you see with custom quick release pins that slide through your existing ammo cans.Features an open style link chute so your cloth belts will run through without snagging and a belt-assist to keep your belts feeding properly and a built in brass deflector.Comes with all hardware and is a true drop in system.The New M8 Adapter is definitley the way to go if you tired of laying on the ground! Comes with all hardware and your choice of colors (Black or OD Green) **Will work with all USGI T&E's or my Custom T&E's**

For more Info and Pic's Click Here

Just released the NEW M12 Tripod Adapter! Adapter!
This newly designed raised M2 Tripod Adapter was designed for the need to have a taller shooting platform that is based off of the M2 Tripod.The M12 Adapter is a more compact yet highly effective design that raises your 1919a4 another 12' inches from the top of your tripod.This will allow the shooter to sit comfortably behind his or hers 1919 and you will no longer need to lay on the ground to shoot. The M12 Adapter comes just as you see with custom quick release pins that slide through your existing ammo cans.Features an open style link chute so your cloth belts will run through without snagging and a belt-assist to keep your belts feeding properly and a built in brass deflector.Comes with all hardware and is a true drop in system.The New M8 Adapter is definitley the way to go if you tired of laying on the ground! Comes with all hardware and your choice of colors (Black or OD Green) **Will work with all USGI T&E's or my Custom T&E's**

For more Info and Pic's Click Here

NEW! M12SE 1919 Adapters


New to the 1919 Adapter lineup is the Beltfedshooters M12SE Adapter. This Adapter system comes complete ready to go, all you need to do is add your M2 Tripod, Pintle, T&E and Gun and your ready to shoot. Check out the features listed below:

Features
•Drops right into any M2, M3 or TNW M4 Tripod
•Adapter raises your 1919 up another 12' inches (Puts your sites at eye level, much better for shooting)
•Has built in Beltfeed chute (Keeps your belts feeding properly)
•Has a built in brass collection system
•Has a built in spent link collection system
•Comes with "Clear" high temp flexible hose (oil resistant and very durable)
•Comes with (1) USGI 25mm Ammo can that has been modified to collect spent Brass and Links (You can collect 3 times as many links and brass before having to dump)
•Comes with All hardware, hose and clamps (Ready to go)
•Has a custom can holder to hold your ammo (Will accept any USGI .30cal ammo can) •Comes in OD Green or Black (Your choice when ordering) •Very easy to use and only takes a few minutes to install •Will come in 2 boxes (easy to transport to the range) Price for complete M12SE Adapter system is $450.00 Plus $65.00 to ship

For more Info and Pic's Click Here

Now Available NEW SG43 Tripod 1919 Adapter


Now available are custom crafted SG43 Tripod Adapter's for your Browning 1919. This newly developed tripod adapter allows you shoot your 1919 from the Russian SG43 Tripod. Heres a few features this tripod adapter offers.

Features
•Specially built custom chassis that drops right into your SG43 Tripod. After you drop it in you simply use your tripods pins to secure it.
•Comes with a built in extended Beltfeed Chute that keeps your belts feeding properly. This Beltfeed chute also allows clearance for your left hand so you can use your tripods elevation lever without any clearance issues. The Beltfeed Chute can accept all calibers from 7.62x39 all the way up to 30.06.
•Adapter comes with built in link collection system. Uses a high temp oil resistant clear hose to guide your spent links into a modified 50 cal ammo can. (Modified ammo can comes with this adapter system) Can also run your cloth belts simply remove the clear rubber hose.
•Has a built in brass deflector (Deflects your brass to the right side) This also will aid in the event of a case rupture will keep your brass and debris out of your face etc.
•Adapter allows full treverse from Right to Left and gives you full elevation using the shield. Can use it with our without your armored shield.
•This adapter is a drop in system and no modifications are necessary to install.
•Adapter comes in OD Green or Black (Your choice when ordering)
•Comes complete ready to install onto your Russian SG43 Tripod
Introductory price for complete SG43 1919 Adapter runs $275.00 plus $30.00 to ship

For more Info and Pic's Click Here

Just released the NEW Multi-Caliber A6 Shooting Adapter
Now available is a custom multi-caliber A6 Shooting Adapter.This adapter utilizes a modifed .30 cal ammo can to hold your ammo and to collect your spent links.Its a simple and very effective design that allows the shooter to have a compact yet versatile shooting system.Never again worry about your spent links falling onto the ground and getting dirty this adapter keeps them clean and ready to re-link at the range.
This is adapter simply pins right onto your 1919 with the supplied hardware and only takes less than a minute to install.This gives you a very affordable clean shooting system for your A6 ground set-up.This adapter accepts all calibers and is very easy to use.

Features
•Modified .30cal ammo for dual purpose use
•Mig & tig welded throughout (welds sanded for a smooth finish)
•Fully enclosed link chute
•Belt assist (keeps your belts feeding properly)
•Quick pins (allows you to take your can off without removing the whole system)
•Support handle (allows you to transfer weight off your shoulder, makes a huge
difference)
•Comes in Black or OD paint scheme
•Has built in brass deflector (keeps brass ejecting out the side and helps
protect from case blowouts, deflect debris aways from the shooter)
•Comes with all hardware and pins right onto your 1919 (no modifications neccessary)
•Comes with modified ammo can (has divider built to keep ammo & links seperate)

For more Info and Pic's Click Here

Just released the NEW Dedicated .308 A6 Shooting Adapter
Now available is a custom dedicated .308 A6 Shooting adapter for your 1919.This Adapter simply drops right onto your 1919 with the supplied hardware and utilizes an MG-3 feed tray which features a quick disconnect for the German MG-3 plastic 50 round drums.This gives your A6 setup a more man-portable shooting system and allows you to carry 50 rounds without having to lug around full 30cal ammo cans. This system also will pin right onto any existing MG3/MG42 AA Tripod.

Features
•Mig and Tig welded throughout (All welds sanded for a smooth finish)
•Has build-in MG-3 feed tray w/quick disconnect
•Comes with 1 plastic MG-3 50 round drum
•Has built-in link chute
•Has built in brass deflector on the bottom (Keeps case blowouts directed away from shooter)
•Comes with all hardware (Takes 1 minute to install)
•Comes in Black or OD Green scheme
•Built in pintle assembly which allows you to drop this adapter right into an MG3 AA Tripod

Price for complete Adapter is $225.00 and $25.00 to ship.

For more Info and Pic's Click Here

Just released the NEW Custom PKM Ammo Box Adapters for your 1919A6
Now available: If you guys like those cool 100 round PKM ammo box's I now make a custom Adapter so you can run these on your 1919A6 configuration. These work great and the adapter is small enough so you really dont see it attached to your 1919. This keeps everything light and gives your 1919A6 a sleeker look. This adapter accepts all 100 PKM Ammo Box's and will allow you to hold 100 rounds of belted Ammo. Accepts all calibers. Links simply drop out the other side, no link chute on these to keep them simple and ultra lightweight.

Features
•Comes with all hardware
•Easy installation (no modifications necessary to install)
•Uses any existing 100 PKM ammo box's
•Allows you to hold 100 rounds of belted ammo
•Has quick detach so you can switch out cans easily
•No more lugging around full size ammo cans or having your ammo lay on the ground while shooting
•Comes in Black or OD paint scheme (Adapter Only)
•AMMO BOX NOT INCLUDED

For more Info and Pic's Click Here

M2HB 50 cal M3 Tripod Adapter
New Item Selling my newly designed M2HBM3 Tripod Adapters for the M3 Tripod.These are a must have is your an avid shooter of the MaDeuce.

• This Adapter simplifies your shooting experience by raising your MaDeuce up by 4' inches.No need to crouch on the ground.You can fully extend the legs and litterally sit in a chair from behind.
• Has a Twin Can design (Holds your ammo and catches your spent links)
• Has a fully enclosed Link Chute
• Has built in Pintle Adapter (Drops right into your tripod pintle and T&E)
• Has a built in Belt-Feed Chute (Keeps your belts feeding properly)
• Gives you Full Treverse from Right to Left and allows the T&E mechanism to move freely as if it was never on there.
• Eliminates the dreaded drop cloth under your tripod just to catch your spent links.
• Heavy steel construction (Mig and Tig welded throughout)
• Each adapter comes with all hardware and requires no modifications to install.
• Gives you a very distinctive,clean shooting platform.
• Each adapter comes painted and test fit before leaving the shop. Standard Color is OD Green.

Price for the M2HB Adapters run $500.00 plus $60.00 to ship.Because these adapters are very time consuming to build please allow 1 full week to process after funds have been recieved.

• Standard feed on these adapters are from left (Belt enters) to right (Links exit) If you need one where the belt enters from the right please let know and I can accomodate you. For more pics please check the gallery section. Paypal users please add 3% on this item Shipping is a flat $60 anywhere in the US.

For more Info and Pic's Click Here

NEW! .50cal M2HB/M3 SOKOLOV Tripod Adapter.
This is a must have item if you like shooting your M2HB/M3 off of the famous Russian Sokolov Tripod.This tripod adapter will allow the gun to sit up higher (chest level) and will make shooting your M2HB more comfortable.This adapter also comes with two quick release ammo baskets which hold a full compliment of ammo and the other collects all of your spent links. Also comes with a built in belt feed chute and link chute.All hardware is included and is a drop in system, no modifications to your tripod is neccessary.Comes in Black or OD Green (Your choice when ordering).

For more Info and Pic's Click Here

Introducing Shoot1919's 30/50 Twin Mount
New Item This custom Tripod Adapter allows you to shoot your M2HB & 1919 all on one adapter.This simplifies your range setup and only requires one T&E mechanism to use.This is truley a unique adapter and is perfect for the shooter who wants the coolest set-up for the range.A definite crowd pleaser

Mount Features:

• Twin design allows you to run 1 .30cal 1919 and 1 .50cal Browning.
• Twin Link catchers (.50cal link catcher has a quick release pin for removal)
• The 1919 Link catcher has a built in ammo can basket for one .30cal ammo can.
• Built in Stainless Feed Chutes w/quick release pins to allow for quick removal.
• Ammo can baskets allow you to open your can lids without taking them out.
• Has built in Pintle assembly's. (Both guns drop right into this mount)
• Has built-in brass deflectors for both guns (incase of kabooms)
• Mig & Tig welded throughtout (all welds sanded for a smooth finish)
• Comes with custom ammo can lids that have been modified for the Stainless feed Chutes (Can run it with or without feed chutes attached)
• All mounting hardware is included (Comes with stainless quick-release pins)
• This Adapter simplifies your shooting experience by raising your MaDeuce up by 4' inches.No need to crouch on the ground.You can fully extend the legs and litterally sit in a chair from behind.
• This mount is truely a drop-in system and will drop right into any existing M3 tripod.
• Comes in your choice of OD Green Or Black paint

Discontinued RPD/M249 Nutsack Adapters
These little adapters will allow you to run any of the M249 100' or 200' round soft packs on your RPD. This is great alternative to the 100 round chinese steel drums (no more rattle rattle rattle) and will give you more clearance under your RPD.

• This is for the Adapter ONLY (100 Round Nutsack Not included)
• This RPD Adapter slides right into your soft pack and locks into place (No modifications necessary to your soft pack)
• Very easy to install

Discontinued

For more Info and Pic's Click Here

Discontinued PKM to RPD Ammo Box Adapters
These custom little adapters simply lock onto any PKM ammo box and allows you to slide it right onto an RPD.Using the PKM ammo box will not only give you a cool PKM look but will allow you to store over 200+ rounds over the regular 100 round RPD Drums.These are a must have if you like to do BIG Belt dumps.

• Slides and locks into your PKM ammo can.
• No modifications necessary to your RPD (locks right up).
• RPD & Ammo box not included.

Discontinued

For more Info and Pic's Click Here

MG3 Tripod Scope Mount
BFS Custom machined MG-3 Ground tripod scope mounts. These custom mounts are machined to fit into the factory scope location and will allow use to use any type of optics you choose. Mount comes with a precision machined picatinney rail and is a great alternative to the factory scope that comes with your MG-3 ground tripod. Now you will be able to use modern optics and will give your setup a whole new meaning of fun!

Price $70.00 Shipped