*NEW* System II 1919 AA Adapter

[Beltfedshooters]

Just released the second generation AA Adapter system.This new adapter system will compliment the current AA Adapter and T&E platform but one of the key features in this new platform is to give the user faster mobility with his or her 1919.This adapter does not require a T&E mechanism but works off of adjustable spring tension.This allows the user to adjust to his or hers shooting style.You can take your hands off the gun and it will return back to level or you can adjust it so it returns upward or downwards.The more spring pressure added to this adapter will make the gun feel lighter and give you faster mobility.(Perfect for F/A guns)

Heres some of the other features that built in to this Adapter:

*New compact design (only 11 1/2' wide versus the current 27' adapter)

*Fully enclosed Link chute (Keep links from falling onto the ground)

*Custom locking pins for your ammo cans (keeps them secure and tight)

*Spring tension design (Eliminates the T&E mechanism)

*Built in Brass chute (Comes w/hose- bucket & lid)

*Comes with all hardware and is a bolt-on system.

*Your choice Black or OD Green Paint

This new Adapter will allow a full 180 degree treverse even with using the brass catching chute.This will make one very clean setup for the range as you will never have to pick up spent links or brass ever again.This really is the ultimate setup if you have a F/A gun or even using a crank.
Price for complete system is $300 plus $25 to ship




No brass, no links, no problem. :mrgreen:
http://img466.imageshack.us/img466/6818/imga0451yy9.jpg (http://imageshack.us)






http://img408.imageshack.us/img408/979/imga0440qf3.jpg (http://imageshack.us)





Shown treversing to the right
http://img409.imageshack.us/img409/6808/imga0438fm8.jpg (http://imageshack.us)


*Note* You can also place your brass catching bucket anywhere around your AA tripod as it will never kink the hose (very flexible)
http://img177.imageshack.us/img177/9448/imga0439qg6.jpg (http://imageshack.us)





Shown with .30 cal ammo cans attached.

http://img177.imageshack.us/img177/9573/imga0417ns8.jpg (http://imageshack.us)




Kali shown here bump-firing a belt through it. :mrgreen:
http://img187.imageshack.us/img187/4848/imga0442wc1.jpg (http://imageshack.us)


These are now listed in the shopping cart.
Thanks guys! :beer:

[Beltfedshooters]

http://img401.imageshack.us/img401/900/imga0416lo9.jpg (http://imageshack.us)





http://img512.imageshack.us/img512/5525/imga0446ko2.jpg (http://imageshack.us)






Shown with "AA Stabilizer" and "AA Leg Stake Kit"
http://img512.imageshack.us/img512/7195/imga0429wf7.jpg (http://imageshack.us)







http://img413.imageshack.us/img413/3739/imga0448ej3.jpg (http://imageshack.us)

[dutigaf]

like the looks of it bub, will it clear the sokolov wheels?

and how does it mount at the bottom? pintle atachment?

[1919_4_ME]

Duti,
Sorry it will not fit the Sokolov and yes it mounts to the AA Tripod using a pintle.You can see in the pic how it mounts, just slide your pin through the pintle yoke and it attached.I built this adapter so it moves your 1919 forward another 2' inches so the wieght is transferred more to the center of the tripod.It helps to make it more stable when firing it.I'll be adding an installation page soon so you can see how it all mounts up. :mrgreen:

[dutigaf]

asked you the same question over at 1919.... will it work on a m2 mount??

[1919_4_ME]

Duti,
Sorry it wont fit the M2 Tripod due to a few factors, the pintle dimension and location of the springs.For now this will be only be available for the AA Tripod. :coffee:

[Slick]

WAY Cool! :headbang: Your brain never takes a break!!! :hail:

[dutigaf]

hmmmm so now im thinking that maybe i could buy one of these cut the bottom off and weld on a piece that would go to the pintle on my m2....

or i could go to the m8 set up... which would be best?

or even are you still making that 14" extension set up?


ahhhh ?????????/'s dont you love it?

[1919_4_ME]

Duti,
I think the best way to go for your M2 Tripod would seriously be the M8 Adapter.Remember if you want to spray and pray you can take your T&E mechanism off and use put your other hand on the rear handle to hold it.In order for this type of Adapter (AA Adapter) to work on the M2 Tripod I would have to make something completely different.If you want something really custom just built for you we can discuss your needs.. :coffee:

[dutigaf]

Rich,

your getting way too serious on me here.....

im just dicking around trying to get the best thing we can come up with that i dont have to keep changing. im actually thinking of making a wheeled mount for it anyway. but that m8 set up is awful sweet!!

who knows what you will sell me next?

by the way: check your pm box for a big titties update.

[1919_4_ME]

Just checked my PM.Here we go... :rofl:

[Kali Komrade]

Oh so Duti's sendin' ya pic's of his SIL now... :bounce:

Mikey likey the new mount... Hmmm... shoot a case or two of ammon and virtually no clean up I'd say thats worth the price....