*NEW* 1919 Twin AA Mounts *Pics*

[1919_4_ME]

**NEW ITEM**

Now Available to the 1919 scene is a custom 1919 Twin AA Adapter. Heres a few features this mount has to offer.

* Twin Can design - 1/2 holds your ammo and the other 1/2 collects your spent links

* Has built in oversized link chutes (Cloth belt friendly)

* Has built in brass collecting capability (Uses a 3.00 inch flexible high temp silicone hose for collecting all of your spent brass. Come with (2) 5 gallon plastic buckets.

* Adapter coms with (2) built in pintle assemblies & (2) built in T&E mechanisms. This allows you to adjust each gun for different fields of fire.

* Adapter comes with (1) reproduction spider site (will be slightly smaller that pictured)

* Comes with (2) Custom shortened USGI .30 cal ammo cans

* Comes with custom padded shoulder supports (fully adjustable for different should widths)

* Adapter comes with adjustable spring tension design (Makes adjusting the spring tension a breeze for different weight guns)

* Comes with all hardware and is a simple pin on installattion (no modifications necessary to your AA Tripod)

* Comes in Black or OD Green paint scheme

* Adapter accepts all 1919/Water Cooled variants

* This adapter does (3) major things... holds your ammo, collects your spent links and collects your brass all in a very compact light weight design.

Price for complete adapter system ready to install onto your AA tripod is $750 plus shipping. Can accept paypal.

* Custom (Heavy) AA Tripods also available at an addition cost.

* These are up in the shopping cart system. Any questions please ask!
Thanks!


A few pics of the Twin 1919 Adapter System

http://img291.imageshack.us/img291/8527/1919twinmount045zh3.jpg (http://imageshack.us/)









http://img291.imageshack.us/img291/4674/1919twinmount059go8.jpg (http://imageshack.us/)




Padded shoulder pads not shown
http://img146.imageshack.us/img146/2035/1919twinmount052zz2.jpg (http://imageshack.us/)









http://img291.imageshack.us/img291/3187/1919twinmount055vp1.jpg (http://imageshack.us/)




http://img252.imageshack.us/img252/7820/1919twinmount053ra7.jpg (http://imageshack.us/)



http://img242.imageshack.us/img242/8503/1919twinmount062ul7.jpg (http://imageshack.us/)



http://img522.imageshack.us/img522/9373/1919twinmount064jb5.jpg (http://imageshack.us/)



http://img79.imageshack.us/img79/8043/1919twinmount054sb4.jpg (http://imageshack.us/)



http://img522.imageshack.us/img522/8594/1919twinmount058zs2.jpg (http://imageshack.us/)


Pictured with (2) air-cooled 8mm Shorties
http://img504.imageshack.us/img504/7059/1919twinmount038mi0.jpg (http://imageshack.us/)




http://img204.imageshack.us/img204/7843/1919twinmount040ia1.jpg (http://imageshack.us/)




http://img99.imageshack.us/img99/842/1919twinmount034ec0.jpg (http://imageshack.us/)


http://img204.imageshack.us/img204/3517/1919twinmount035yv8.jpg (http://imageshack.us/)



http://img242.imageshack.us/img242/9234/1919twinmount033hb9.jpg (http://imageshack.us/)



http://img242.imageshack.us/img242/4771/1919twinmount004ta8.jpg (http://imageshack.us/)

[1919_4_ME]

Heres a few more pics...:army:


http://img189.imageshack.us/img189/7770/1919twinmount171.jpg (http://img189.imageshack.us/i/1919twinmount171.jpg/)


http://img189.imageshack.us/img189/1636/1919twinmount166.jpg (http://img189.imageshack.us/i/1919twinmount166.jpg/)


http://img194.imageshack.us/img194/9726/1919twinmount167.jpg (http://img194.imageshack.us/i/1919twinmount167.jpg/)



http://img194.imageshack.us/img194/5343/1919twinmount161.jpg (http://img194.imageshack.us/i/1919twinmount161.jpg/)


http://img20.imageshack.us/img20/5366/1919twinmount175.jpg (http://img20.imageshack.us/i/1919twinmount175.jpg/)


http://img197.imageshack.us/img197/1512/1919twinmount168.jpg (http://img197.imageshack.us/i/1919twinmount168.jpg/)


http://img197.imageshack.us/img197/661/1919twinmount173.jpg (http://img197.imageshack.us/i/1919twinmount173.jpg/)



http://img30.imageshack.us/img30/6919/1919twinmount180.jpg (http://img30.imageshack.us/i/1919twinmount180.jpg/)



http://img30.imageshack.us/img30/5875/1919twinmount028.jpg (http://img30.imageshack.us/i/1919twinmount028.jpg/)

[1919_4_ME]

YouTube - 1919A4 Twin AA Mount





YouTube - Twin 1919A4 AA Mount



Live fire videos will be uploaded soon...

[rugman59]

Those are friggin SWEET! I'm a tad short financially right now.
Tell you what, toss in a 1919a4 and I'll buy one!:wink:
Well, come on! I'd look retarded with that and only one browning on it!:green:
NICE!:smile:

[1919_4_ME]

Another satisfied customer. :army: He's going to trim the hose to size and just added 2 green laser's to the guns. Shoulder supports were taken off so he could he could fit it in his office for the time being (makes a cool office display). Should be a fun weapons platform when it hits the range.:cool:


http://i932.photobucket.com/albums/ad167/Beltfedshooters/twinmountpic.jpg



http://i932.photobucket.com/albums/ad167/Beltfedshooters/twinmountpic1.jpg

[GUNNER 50]

My order will be in tomorrow.

[1919_4_ME]

My order will be in tomorrow.


Sounds good I'll get yours in motion just finishing up on (3) Twin Mounts for a customer.:army:

[1919_4_ME]

These have been added back into our shopping cart system and are ready to go.

* Please note the reproduction AA sites are currently on back order and will ship to you as soon as they come in. Could be 1-2 months though but I can still ship your AA Twin Adapter in the mean time.

Thanks guys.:cool:

[GUNNER 50]

Hip Hip Hurray!!....I will reorder today after work :smile:

[1919_4_ME]

Hip Hip Hurray!!....I will reorder today after work :smile:


Thanks! Getting your order all ready to ship.:thumb:

[theduke]

Is there a Vid of this unit in action? WANT!

[1919_4_ME]

Is there a Vid of this unit in action? WANT!


I've sold quite a few to guys with F/A's but I have never seen anyone make a video of them running yet...:sad1:

[1919_4_ME]

Just dropped off (3) Custom Twin 1919 AA Mounts to a customer today along with some custom AA Heavy tripods, MG-3 Ground 1919 Adapters and a few custom vehicle pintles. Took a few pics just for the hell of it. This customer is definitely starting off the right way as he owns around 12-15 Brownings already and is having more made. The fun never ends..:tongue:

http://img692.imageshack.us/img692/5007/3twin1919aamounts001.jpg (http://img692.imageshack.us/i/3twin1919aamounts001.jpg/)



http://img519.imageshack.us/img519/6752/3twin1919aamounts002.jpg (http://img519.imageshack.us/i/3twin1919aamounts002.jpg/)



http://img268.imageshack.us/img268/69/3twin1919aamounts003.jpg (http://img268.imageshack.us/i/3twin1919aamounts003.jpg/)



Just laying them out on the ground so he can inspect them.
http://img94.imageshack.us/img94/7049/3twin1919aamounts006.jpg (http://img94.imageshack.us/i/3twin1919aamounts006.jpg/)



I took some 40mm military cans and modified them with 3' inch inlets so they can act as brass catchers. These were an added upgraded over the 5 gallon plastic buckets and will give it a more authentic look.:cool:
http://img148.imageshack.us/img148/5264/3twin1919aamounts010.jpg (http://img148.imageshack.us/i/3twin1919aamounts010.jpg/)



All current Twin AA Adapters come with a New 2-Piece design that allows you to detach the rear support bar that you attach your shoulder supports to. These are now made of 304 stainless steel and when you detach them as shown in the pics it will make your adapter more compact for storage. All Belt guides are 304 stainless as well.
http://img218.imageshack.us/img218/5368/3twin1919aamounts014.jpg (http://img218.imageshack.us/i/3twin1919aamounts014.jpg/)


More pics will follow when he gets them setup and running...:army:

[GUNRUNNER5150]

looks like somebody is planning on a good time :shock:

[Kali Komrade]

Love how compact they break down to...

[anm2_man]

What was the shipping weight on the 3 of those ?

[1919_4_ME]

What was the shipping weight on the 3 of those ?


There right around 40-50 lbs for each Twin Mount and come in 2 boxes when I ship them.:army:

[1919_4_ME]

Gunner50 should be receiving his any day now. Hopefully he has (2) F/A 1919's to drop in it I want to see a video of it running.:coffee:

[GUNNER 50]

Yep, i received it Friday!.....Holy shit this thing was well packed....I was spent just unpacking it :green:....It is pretty much laying all around my living room right now...I have not had a chance to mess with it because I had a vary busy weekend.....But my impression so far is that the mount itself is vary heavy and built like a tank...I bet I could turn it into scrap cash it in and get 1/2 my money back....I was also surprised how much smaller it was compared to the pic's...Which is great for hauling and storing....I guess you don't realize how much time and effort that go's into one until you have sitting in front of you....It will be a couple of weeks before I get it all together and out to the range...I have to try to track down the right pentel to mount it to my AA mount..I will put out a WTB later for that......All I have is semi's:sad1:....And I don't own a digital camera nor do I know how to post pic's.....Yet!....But I will be working on that soon...........All and all.....This has been something I have wanted since Rich first started making them I kept putting it off for other stuff....But I am glad I decided to make the leap....This by far is the pentacle of my 1919 accessory collection and it don't get any better then this....It will complement the twin AK 47 gatling setup I got yesterday....Both will be on display at the Southern Ohio MGS this summer, where I can really open them up:smartass: ...Needless to say , I am vary happy with BFS Twin mount...I will be even happier when the spider site gets here :wink:.....Link to the pic's of my Gatling AK's http://www.1919a4.com/forums/showthread.php?threadid=32046 ......GUNNER 50

[1919_4_ME]

Hey James glad it arrived and you like your adapter so far. A few simple things to install your Twin Mount on your AA Tripod.

1. First run a 1/2' drill bit through your AA Tripod Pintle Yoke holes (OEM holes are metric and are slightly smaller than 1/2')

2. Install your Twin Mount onto your AA Tripod and slide the 1/2' pin through.

3. Next attach the bottom clamp assembly that is supplied. (This part attached to your AA Pintle Shaft) Attach it down at the very bottom of the shaft.

4. Next once attached go ahead and attach the heavy springs onto your adapter.

5. Next attach the 2 eyelet bolts that are supplied to your "Clamp Assembly"

6. Next you want to tilt your Twin Mount Adapter ALL the way forward so its looking at the ground. This will give you plenty of slack to attach the heavy springs with little effort.

7. Once the Springs are attached to your adapter the mount should be pointing downward.

8. Now your ready to start installing your 1919's. Once you install your first 1919 you will notice the mount to start to sit back on its own.

9. Once you install your second 1919 the weight of both guns should start to put lots of tension on the springs. Now you are ready to adjust the tension via the "eyelet bolts".

10. You can play around with the tension and set it at different spring rates. basically the idea is to have it so its sitting in a level position when no one is touching it. This will allow you to maneuver the guns very easily while shooting, you shouldn't feel any weight on the guns since the springs are doing the all the work.

Other than that everything else is pretty simple to attach or adjust. The hoses are purposely a little long so you can cut them to your favorite height.

Anyways thanks again and hope you enjoy your Twin Mount!:beer:

[GUNNER 50]

I meant to say...." I guess you don't realize how much time and effort that go's into (Building) one until you have it sitting in front of you".....Setup will be a breeze.....But, thanks for the walk-through :green:

[1919_4_ME]

I meant to say...." I guess you don't realize how much time and effort that go's into (Building) one until you have it sitting in front of you".....Setup will be a breeze.....But, thanks for the walk-through :green:


Hey no problem and as soon as those AA Sites come in I will send it on out to you.:thumb:

[GUNNER 50]

These are of me at the SOMGS YouTube- 012.AVI YouTube- 008.AVI nhttp://i841.photobucket.com/albums/zz339/GUNNER50/013.jpg