*NEW* 1919 M2 Tripod AA Pintle Adapters *NEW*

[1919_4_ME]

*Now Available M2 Tripod AA Pintle Adapters**
__________________________________________________ ___________

If any of you guys own my current AA Adapters or Second Gen AA Adapters that fit the MG3 AA Tripod then this pintle is for you.The pintle is an exact copy of the AA Tripod pintle but it designed to be used with the M2 Tripod instead.This will allow the shooter to sit lower to ground and will give you a full 360 degree's of treversing.
Also if you have the "Quick Disconnect" left over from your AA Tripod you can shoot your MG34/42 from it.To use this pintle it simply locks into your existing USGI pintle and makes for one rock solid shooting platform.The pictures below show my (Second Gen AA Adapter) mounted to it.The use of this pintle will give you more flexibility with your shooting style and allows faster target aquisition.Will also work in any vehicle platform that takes the USGI pintle.

Price for the (M2 Tripod AA Pintle)alone is $109 shipped
This is a must have item if you like a mid height shooting platform. :mrgreen:
__________________________________________________ ___________


http://img110.imageshack.us/img110/93/imga0786gs7.jpg (http://imageshack.us)


Second Gen AA Adapter shown mounted on the Second Gen Pintle Adapter.
http://img110.imageshack.us/img110/2290/imga0783wp4.jpg (http://imageshack.us)





Pintle Adapter shown installed and ready for your Second Gen AA Adapter or Standard AA Adapter and T&E mechanism.
http://img110.imageshack.us/img110/6632/imga0773en8.jpg (http://imageshack.us)



Plenty of elevation.
http://img112.imageshack.us/img112/2798/imga0790yn2.jpg (http://imageshack.us)


Pintle allows 360 degree's of treversing.
http://img110.imageshack.us/img110/6651/imga0787fg2.jpg (http://imageshack.us)



Any questions just ask!

[dutigaf]

im seriously considering on of these bub, will this work on the adapter ive got from you for my 1919??

can i still get it with the spring set up?

does it hold the gun stiff enough with out the T&E?

[1919_4_ME]

Sean,
Actually this pintle will not work with your M2A4 Adapter (Different pintle yoke dimension).In the pics shown above you can see how you still have alot of downward adjustment for the spring clamps.If you move the clamp down more the spring pressure goes tighter which will put more tension on your 1919.In the pics they are adjusted so that it easily holds your 1919 without no hands or T&E.This is the way to go if you want a fast target aquisition such as fast flying R/C airplanes... :peep:

[dutigaf]

ok we decided what to do with me in the other thread. thanks!!